1410 High Angle Offset Universal Joint
1410 High Angle Offset Universal Joint
1410 High Angle Offset Universal Joint
1410 High Angle Offset Universal Joint
1410 High Angle Offset Universal Joint
1410 High Angle Offset Universal Joint

1410 High Angle Offset Universal Joint

Rated 5.0 out of 5
Based on 1 review

SKU: 1410 Tom Woods Super-Flex Universal Joint

Regular price $69.99 Sale price $62.99

The unique design of off-set trunnions sets the mating yokes further apart than a more conventional joint. This allows for 10 degrees more flexibility than would be otherwise obtainable. While 10 degrees may not sound like a lot, with a 30" drive shaft, this will allow more than 5" of additional droop at your axle prior to binding of the universal joint. Our testing shows that installing this universal joint into standard yokes, the drive shaft will flex to 40 degrees. With a little grind work on the yokes the drive shaft will flex to 45 degrees.

The "Super-Flex" universal joint was not designed to be a "cure all", but rather specifically to solve a binding problem that one may incur under situations such as full axle droop and spring wrap. Situations like a front drive shaft, where you have a lot of lift and have also installed buggy springs or revolver shackles in conjunction with your shackle reversal.

We have never made any secret of the fact that this joint does cause some vibration problems. (In fact we will not even sell it unless the customer is aware of its limitations). This is due to the introduction of the 3rd plane of operation, which will cause the drive shaft to run eccentric. The amount of eccentricity is a function of how steep the drive shaft runs to begin with.


We're wheelers too - we back every product with the TMR Customs quality guarantee. Our products are designed to be the ultimate in durability and withstand years of abuse. So go ahead and abuse them in the dirt and rocks - just as they were intended!

DESIGNED, MANUFACTURED AND TESTED BY TRUE OFF ROAD ENTHUSIASTS!

average rating 5.0 out of 5
Based on 1 review
  • 5 Stars
    1 Review
  • 4 Stars
    0 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
1 Review
Reviewed by matthew g.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

Extra angle

These u joints worked out really well to help with the steep angle of my front drive shaft, they gave me the extra few degrees I needed so the yoke would not bind up.

They are also pretty strong, never broke one, even with some of the worst leaf spring hop on 47s🤣

Loading...
Was this helpful?

TMR Customs

Nice! Thanks for the great review, Matthew. We're glad to hear our U-joints helped solve the steep angle issue with your front driveshaft and provided the extra degrees needed to prevent binding. It's also great to know they held up well even on 47s!