High Steer Arms

High Steer Arms

Dana 60 & 44 High Steer Arms - Control Arm Fabrication Parts

These steering arms will handle anything you throw at them. The control arm fabrication parts include Double-shear high steer arms, Dana 60, Dana 60 high steer, D60 hi steer, crossover high steer arms, crossover steering arms, ball joint high steer, high steer machining, Dana 44 flat top knuckle machining, raised Dana 44 high steer arms, flat Dana 44 high steer arms, double shear tie-in for high steer, Dana 60 studs, Dana 60 high steer stud, 05+ Ford Dana 60 high steer, 2005 and up Dana 60 high steer, Ford Super Duty high steer arm and super 60 steering arms. If you need tie rod ends and steering builder products, shop our other steering parts today!
11 Item(s)
  1. Dana 60 Double Shear High Steer Arm - KING PIN

    Options
    • Side
    From: $179.95

    Compare TMR Customs arms to the competition and you will see there is no comparison! TMR Customs NEW Dana 60 Double Shear High Steer Arms are stronger and will survive years of abuse! 

    Pair up your arms with our optional "Knuckle Tie In Kit" to mount your Steering Joints in double sheer for the ultimate in strength. 

    We have added the 5th mounting hole for compatibility with aftermarket knuckles, and all of the mounting holes are properly tapered for use with stud & nut kits. Our arms have the proper 9 degree angle milled on them to account for the king pin inclination on your Dana 60. 

    Our springless design allows you to properly preload your kingpins, allowing for long life and reducing slop/backlash in your knuckles. 

  2. 2005-2012 Ford "SUPER 60" Double Shear High Steer Arms

    Options
    • Side
    From: $179.95

    Compare TMR Customs arms to the competition and you will see there is no comparison! TMR Customs NEW Dana 60 Double Shear High Steer Arms are stronger and will survive years of abuse!

    Pair up your arms with our optional "Knuckle Tie In Kit" to mount your Steering Joints in double sheer for the ultimate in strength.

    Our new "SUPER 60" Double Shear High Steer Arms are machined with a keyway - they are without question the strongest arm on the planet and the last arm you'll ever need.

    FITS ONLY 2005 TO 2012 10 LUG SUPER 60 FROM F450/550. DO NOT CONFUSE THIS AXLE WITH A STANDARD F250/350 DANA 60!

    INCLUDES HARDWARE!

  3. Dana 60 Hi Steer Stud & Nut - KING PIN

    $10.95
    Manufactured by ARP, these high strength Dana 60 Stud & Nut Kits are rated for 220, 000 PSI of tensile strength!
  4. Dana 60 Double Shear High Steer Arm - KNUCKLE TIE IN KIT

    Options
    • Side
    From: $34.95
    Perfect for tieing TMR Customs Double Shear High Steer Arms back to the factory knuckle position for double shear mounting of your steering joints!
  5. 2009-2016 Ford Dana 60 Double Shear High Steer Arms

    Options
    • Side
    From: $179.95

    Compare TMR Customs arms to the competition and you will see there is no comparison! TMR Customs NEW Dana 60 Double Shear High Steer Arms are stronger and will survive years of abuse!

    Pair up your arms with our optional "Knuckle Tie In Kit" to mount your Steering Joints in double sheer for the ultimate in strength.

    Our new 2009-2012 Double Shear High Steer Arms are machined with a keyway - they are without question the strongest arm on the planet and the last arm you'll ever need.

    INCLUDES HARDWARE!

  6. 2005-2008 Ford Dana 60 Double Shear High Steer Arms

    Options
    • Side
    From: $179.95

    Compare TMR Customs arms to the competition and you will see there is no comparison! TMR Customs NEW Dana 60 Double Shear High Steer Arms are stronger and will survive years of abuse! 

    Pair up your arms with our optional "Knuckle Tie In Kit" to mount your Steering Joints in double sheer for the ultimate in strength. 

    Our new 2005-2008 Double Shear High Steer Arms are machined with a keyway - they are without question the strongest arm on the planet and the last arm you'll ever need. 

  7. 1999-2004 Ford Dana 60 Double Shear High Steer Arms

    Options
    • Side
    From: $179.95

    Compare TMR Customs arms to the competition and you will see there is no comparison! TMR Customs NEW Dana 60 Double Shear High Steer Arms are stronger and will survive years of abuse! 

    Pair up your arms with our optional "Knuckle Tie In Kit" to mount your Steering Joints in double sheer for the ultimate in strength. 

    Our new 1999-2004 Double Shear High Steer Arms are machined with a double keyway - they are without question the strongest arm on the planet and the last arm you'll ever need. 

  8. FORD BALL JOINT D60 High Steer Arm - 1992-1998

    Options
    • Side
    From: $144.95
    • Blank arm allows you to place your tie rod and/or drag link location to suit your custom application
    • Requires machining your factory knuckle to accept the high steer arm! 
  9. Dana 44 High Steer Arms - Flat

    Options
    • Side
    From: $119.95

    We are proud to sell the highest quality steering arms in the off-roading market today! Our Dana44 arms are no exception. Each arm is a 100% CNC machined one-piece unit. Combine this with a perfect geometry adjusted for steering and balljoint Axis Inclination Angle - and the result is a perfect parallel surface between arms. 

    If all that was not enough, all our 44 arms are 4th hole compatible for ultimate use with Reid Racing and Solid Axle knuckles. 

    Designed for hard use on linked trucks. These arms are built to handle every application whether it be crossover, high steer,or full hydraulic. Arms come drilled with 5/8" holes for rod ends.

  10. Dana 44 High Steer Arms - Raised

    Options
    • Side
    From: $179.95

    We are proud to sell the highest quality steering arms in the off-roading market today! Our Dana44 arms are no exception. Each arm is a 100% CNC machined one-piece unit. Combine this with a perfect geometry adjusted for steering and balljoint Axis Inclination Angle - and the result is a perfect parallel surface between arms. 

    If all that was not enough, all our 44 arms are 4th hole compatible for ultimate use with Reid Racing and Solid Axle knuckles. 

    Designed for hard use on linked trucks. These arms are built to handle every application whether it be crossover, high steer,or full hydraulic. 

    If you're building a rig with a Dana 44 and leaf springs - you're going to run into problems with getting the tie-rod over your leaf spring pack. One solution previously used is to add a 'spacer' underneath the steering arm and fastening using exceptionally long studs. This system under loads has an increased failure rate due to the studs sheering and arm disconnecting from the knuckle.

    Our arms have a mounting surface 2.5" above the knuckle ( 1.25" taller than flat arms, not a measly 7/8" like our competitors ). The arms are 1.25" thick at the knuckle mount and still retain the use of standard length studs. To accomplish this we CNC the arms out of blocks of Billet-Steel!

  11. Dana 44 Hi Steer Stud & Nut

    $14.95
    Manufactured by ARP, these high strength Dana 44 Stud & Nut Kits are rated for 220, 000 PSI of tensile strength!
11 Item(s)