THE GRIZZLY Hole Saw Tube Notcher

Name: THE GRIZZLY Hole Saw Tube Notcher
Brand: TMR Customs
SKU: 2325
Price: 627.95 USD
Availability: InStock
Rating: 4.8 (10 reviews)

Rated 4.8 out of 5

Based on 10 reviews

SKU: 2325

€627,95

Introducing The Grizzly Hole Saw Tube Notcher! The first and last tubing notcher you will buy!

At TMR we’ve been notching tubes and reselling tube notchers for years. We’ve learned many pitfalls and shortcomings of notchers along the way. This has allowed us to develop and manufacture The Grizzly Tube Notcher - guaranteed not to let you down!

The key to tube notching and any metal cutting is rigidity. With a 1-1/4” thick main block, 1” thick swing arm and 1-1/4” heat treated chromoly shaft we guarantee The Grizzly is the most rigid hole saw notcher on the planet.

Why buy The Grizzly over other hole saw tubing notchers?

Ability to pivot and reach around to notch from both sides of the tube - allowing for up to 240 degrees of notch angle
2 clamps allow you to notch on a bend
Round Tube 2-1/2” Max capacity
Square Tube 2”x2” Max capacity
Flat Bar 2” Max capacity
Angle Iron 2” Max capacity
Offset notch up to 2-1/2” via adjustable dovetail block
Degree Ring with Adjustable Pointer
Billet aluminum bearing block
Made in USA self lubricating bronze bearings
1-1/4” heat treated, ground and polished, 4140 chromoly shaft
Main Block is black oxide coated
Clamps and Degree pointer are powder coated
Heat treated & replaceable drill attachment - can be used with 3/8” and 1/2” hand drills
Heat treated and replaceable hole saw attachment - fits 9/16” to 3” diameter hole saws with 1/2”-20 or 5/8”-18 arbor threads
Can be Vice mounted or fixture mounted using tapped holes in bottom of main block
Can be mounted directly to a chassis or roll cage to make notch repairs or modifications

Hole saw/saws not included! If you need quality hole saws click here for Starrett brand "Fast Cut"!

Check out our other off-road fabrication and cutting tools today! Shop now!

We're wheelers too - we back every product with the TMR Customs quality guarantee. Our products are designed to be the ultimate in durability and withstand years of abuse. So go ahead and abuse them in the dirt and rocks - just as they were intended!

Our Return Policy

DESIGNED, MANUFACTURED AND TESTED BY TRUE OFF ROAD ENTHUSIASTS!

Write a Review

average rating 4.8 out of 5

Based on 10 reviews

5 Stars

8 Reviews
4 Stars

2 Reviews
3 Stars

0 Reviews
2 Stars

0 Reviews
1 Star

0 Reviews

90% of reviewers would recommend this product to a friend

Customer photos and videos

Open user-uploaded photo and review in a modal

10 Reviews

Sort by

Reviewed by Guy L.

Verified Buyer

I recommend this product

I was stubborn and would hand draw my notches, and they never came out quite perfect, and took way too long. Once I invested in my time and got this notcher, not only have I saved 4x the amount of time, but my notches come out way cleaner and tighter now. Also being able to use it on flat plate for cutting out tube caps with the steps on the block comes in super handy, too.

Was this helpful?

TMR Customs

Hell yeah! Thanks for the stellar review. Glad to see you've found a ton of good uses for your Grizzly Notcher!

Reviewed by Nathan R.

Verified Buyer

I don't recommend this product

Rated 4 out of 5

Review posted

Needs Improvements

Overall - This thing is pure beef. It is DEFINITELY built to take punishment. Excellent build quality, great fit and finish. I set it up right away and started making some notches and noticed a few spots that The Grizzly needs improvements on. Notch quality is decent once tool is set properly. This thing SPANKS my old harbor freight notcher but still needs refinement in my opinion.

1. The Degree Wheel - its built to rotate so you can "re-calibrate" from time to time. after a few notches I used my thumb to gently wipe away the metal shavings and scratched the degree numbers. I'd suggest engraving the tool with the numbers, or offer an engraved degree wheel. I don't really need to adjust the degree wheel anyway. If anything the degree indicator can be bent back into position to "recalibrate".

2. The orange clamp mechanisms are pretty clumsy. I thought this was something I would not notice as much. Turns out, when you are trying to maneuver a part with 4 bends into the tool - these clamps are a pain. with simple parts or straight pieces - not quite as bad. The swivel ends are pretty finicky for trying to slide notched parts out and new parts in. Something that only takes one hand to tighten -and without a wrench - would be a massive improvement.

3. Another customer mentioned a double wrench should be included - I agree. I sacrificed a couple and welded them together. Not a deal breaker though.

Another note - USE CAUTION WHEN BACKING OUT SMALL HOLE SAWS - anything 1.25" or…

Was this helpful?

TMR Customs

Thanks for the detailed review, Nathan. We appreciate the feedback.
For the clamps, I always tighten them down by hand using the knurled thumb wheels, then crank them tight with a wrench. Hopefully that's something that can help you when setting up/clamping tubes.
Have an awesome day!