Accessories

***STEEL-IT CAN ONLY BE SHIPPED VIA UPS STANDARD GROUND! IF YOU CHOOSE A DIFFERENT SERVICE LEVEL WE WILL PROCEED BY SHIPPING YOUR ORDER VIA UPS STANDARD GROUND***

The STEEL-IT Polyurethane Coating System features a unique stainless steel leafing pigment, and provides optimum weather, abrasion, and corrosion resistance in off-road racing applications. The easy to apply system yields a hard, non-toxic, metallic finish that protects a multitude of metallic and non-metallic surfaces from ultraviolet rays, chemicals, oils, alkalis, food acids, water immersion, abrasion, and high-pressure washdowns.

This single component coating does not require complicated mixing. Apply it directly from the can, it is air dried and requires no baking or heating. USDA-approved for use in the food processing and handling industry where incidental food contact may occur, STEEL-IT Polyurethane #1002 blends polyurethane resin with Type 316L stainless steel leafing pigment to produce a rugged, non-toxic, satiny metallic finish.

Application Guide:

• CNC machined from cold rolled steel for easy welding
• Steel hex head and plunger pin are zinc coated for corrosion resistance
• Steel hex head allows for the assembly to be properly tightened. It won't crack or fall apart like similar plastic versions.

***STEEL-IT CAN ONLY BE SHIPPED VIA UPS STANDARD GROUND! IF YOU CHOOSE A DIFFERENT SERVICE LEVEL WE WILL PROCEED BY SHIPPING YOUR ORDER VIA UPS STANDARD GROUND***

The STEEL-IT Polyurethane Coating System features a unique stainless steel leafing pigment, and provides optimum weather, abrasion, and corrosion resistance in off-road racing applications. The easy to apply system yields a hard, non-toxic, metallic finish that protects a multitude of metallic and non-metallic surfaces from ultraviolet rays, chemicals, oils, alkalis, food acids, water immersion, abrasion, and high-pressure washdowns.

This single component coating does not require complicated mixing. Apply it directly from the can, it is air dried and requires no baking or heating. USDA-approved for use in the food processing and handling industry where incidental food contact may occur, STEEL-IT Polyurethane #1002 blends polyurethane resin with Type 316L stainless steel leafing pigment to produce a rugged, non-toxic, satiny metallic finish.

Application Guide:

• CNC laser cut from 3/16" & 1/8" steel
• Dimple die'd plate for added strength
• Mounting pad is wide enough to fit up to 2" diameter tube
• Tube mounting foot is sold Individually! 

Be sure to check out our other off-road suspension products and shock/strut towers! 

• CNC laser cut and formed from 12 gauge steel
• Can be bolted using existing holes or welded in place
• Safely clamps battery in place, and can be mounted in any position 
• Includes grade 8 fasteners
• Fits D34/78 series Optima battery

• Can be used to mount a fire extinguisher to almost any round or flat surface
• Does not have a locking feature. Don't be caught fumbling for a miniature lock key while you watch your rig burn to the ground! You are purchasing a rapid release mount for a reason - don't make it a "no release" mount. 
• Includes laser cut and keyed steel pieces for easy assembly, as well as stainless steel hardware and a high quality made in USA pull pin
• Fire extinguisher not included!
• Welding required!
  
  
  

Fits radiators from Ron Davis, CBR Performance, Griffin, and many more! The universal design makes it easy to fit/modify to suit your radiator. 

CNC laser cut 
Assembly required! 

Another smart solution from TMR! Our weld-on eyelets are CNC machined from USA made 4140 chromoly steel for unbeatable strength and reliability. Designed for versatility, they’re perfect for a range or uses!

Common uses include:

• S-hook style ratchet straps

• Snap-in seat belt harnesses (PRP, Mastercraft, Crow, Simpson, Impact, Sparco, etc.)

• Limit strap connections

• Tie-down points on trailers, race chassis, or tube buggies

Whether you’re securing a rig or dialing in safety gear, TMR’s weld-on eyelets deliver the durability and performance serious fabricators demand.

• CNC Machined from USA made 4140 Chromoly Steel

• Fits a wide range of off-road and motorsport/racing applications

• Built to last — no shortcuts, no compromises

• Sold individually

⚠️ Please note: This product is not load rated.

The perfect addition to the passenger side of your buggy! Can be welded or bolted in place. 

Complete assembly includes grips!

• Marine Grade Battery Disconnect Switch 
• Knob Type ON/OFF Switch with Removable Key
• 275 Amp DC Continuous/ 455 Amp DC Intermittent/ 1250 Amp DC Cranking
• 2-3/4 Inch Length x 2-3/4 Inch Width x 3 Inch Height

Another smart solution from TMR! Our weld-on eyelets are CNC machined from USA made 4140 chromoly steel for unbeatable strength and reliability. Designed for versatility, they’re perfect for a range or uses!

Common uses include:

• S-hook style ratchet straps

• Snap-in seat belt harnesses (PRP, Mastercraft, Crow, Simpson, Impact, Sparco, etc.)

• Limit strap connections

• Tie-down points on trailers, race chassis, or tube buggies

Whether you’re securing a rig or dialing in safety gear, TMR’s weld-on eyelets deliver the durability and performance serious fabricators demand.

• CNC Machined from USA made 4140 Chromoly Steel

• Fits a wide range of off-road and motorsport/racing applications

• Built to last — no shortcuts, no compromises

• Sold individually

⚠️ Please note: This product is not load rated.

Building a roll cage for your offroad rig? When tying your cage to your frame these are the perfect way to add strength and longevity to your frame area by distributing forces better than simply welding tube to your frame.

Simply slide these on the tube, then weld the tube to your frame followed by sliding the Cage to Frame Plate over your original tube weld and then welding the plate to the tubing and to the frame.

***The small slots provided are for PLUG WELDS not for bolting the plates to the frame.***

SOLD INDIVIDUALLY!

Hit the dirt in style with the TMR Jaz JeepSpeed Fuel Cell Mount. This CNC laser cut mount will give you the strength, reliability, and stability you need for your JeepSpeed 32 gallon fuel cell (part # 286-432, or 286-432-NF). Its universal design ensures a secure fit! So take the leap, let the wind blow, and hit the trails or race course with confidence and precision.

Assembly and welding required! 

• Commonly used on transmissions, transfer cases, axles, power steering and anywhere else needing venting
• Ball bearing inside the housing will move to the closed position when turned upside down
• Machined from aluminum
• Includes -6AN fitting
• Sold as pictured - Sharpie not included ;)

• CNC laser cut and formed from steel
• Measures 40" x 18" x 5"
• Dimple die'd panels for the ultimate in strength, rigidity, weight reduction and functional good looks!
• Includes stainless steel fasteners

***STEEL-IT CAN ONLY BE SHIPPED VIA UPS STANDARD GROUND! IF YOU CHOOSE A DIFFERENT SERVICE LEVEL WE WILL PROCEED BY SHIPPING YOUR ORDER VIA UPS STANDARD GROUND***

The STEEL-IT Polyurethane Coating System features a unique stainless steel leafing pigment, and provides optimum weather, abrasion, and corrosion resistance in off-road racing applications. The easy to apply system yields a hard, non-toxic, metallic finish that protects a multitude of metallic and non-metallic surfaces from ultraviolet rays, chemicals, oils, alkalis, food acids, water immersion, abrasion, and high-pressure washdowns.

This single component coating does not require complicated mixing. Apply it directly from the can, it is air dried and requires no baking or heating. USDA-approved for use in the food processing and handling industry where incidental food contact may occur, STEEL-IT Polyurethane #1002 blends polyurethane resin with Type 316L stainless steel leafing pigment to produce a rugged, non-toxic, satiny metallic finish.

Application Guide: