1350 High Angle Offset Universal Joint
1350 High Angle Offset Universal Joint
1350 High Angle Offset Universal Joint
1350 High Angle Offset Universal Joint

1350 High Angle Offset Universal Joint

Rated 5.0 out of 5
Based on 2 reviews

SKU: 1350 Tom Woods Super-Flex Universal Joint

Regular price €59,95

The unique design of off-set trunnions sets the mating yokes further apart than a more conventional joint. This allows for 10 degrees more flexibility than would be otherwise obtainable. While 10 degrees may not sound like a lot, with a 30" drive shaft, this will allow more than 5" of additional droop at your axle prior to binding of the universal joint. Our testing shows that installing this universal joint into standard yokes, the drive shaft will flex to 40 degrees. With a little grind work on the yokes the drive shaft will flex to 45 degrees.

The "Super-Flex" universal joint was not designed to be a "cure all", but rather specifically to solve a binding problem that one may incur under situations such as full axle droop and spring wrap. Situations like a front drive shaft, where you have a lot of lift and have also installed buggy springs or revolver shackles in conjunction with your shackle reversal.

We have never made any secret of the fact that this joint does cause some vibration problems. (In fact we will not even sell it unless the customer is aware of its limitations). This is due to the introduction of the 3rd plane of operation, which will cause the drive shaft to run eccentric. The amount of eccentricity is a function of how steep the drive shaft runs to begin with.


We're wheelers too - we back every product with the TMR Customs quality guarantee. Our products are designed to be the ultimate in durability and withstand years of abuse. So go ahead and abuse them in the dirt and rocks - just as they were intended!

DESIGNED, MANUFACTURED AND TESTED BY TRUE OFF ROAD ENTHUSIASTS!

average rating 5.0 out of 5
Based on 2 reviews
  • 5 Stars
    2 Reviews
  • 4 Stars
    0 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
2 Reviews
Reviewed by DW
Verified Reviewer
I recommend this product
Rated 5 out of 5
Review posted

I have these on my CJ7

I clocked my ATLAS flat and I thought I was "OK" with my driveshaft in the front. Turns out with the dynamic drop I didn't have enough clearance. Bent my driveline and had to limp out of Rubicon in 2wd. I put one of these on and ground the yoke a bit for clearance and now I am fine. Even works on the street. At 30mph you feel a bit of vibration, but not that bad. I rarely put it in 4x4 on the street anyway.

Loading...
Was this helpful?

TMR Customs

Nice! Great to hear the offset joint solved your problem.

Reviewed by Steven A.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

Offset u joint

Shipping was crazy quick and the off set i joint corrected my drive line bind after a 203/205 doubler and it didn’t break on the first trip out so I’m happy

Loading...
Was this helpful?

TMR Customs

Awesome! Glad to hear the offset u joint was the fix!

You may also like