Tool Organizers

When it comes to organizing your shop, race trailer, chase truck, overlander and more TMR Tools has you covered!

Easily store and swap your paper towels or shop towels using TMR's holder! No more looking for the half used roll that's kicking around on the bottom of your cart or sitting in a pile of dust under your bench! 

When it comes to organizing your shop, race trailer, chase truck, overlander and more TMR Tools has you covered!

Easily store and swap your paper towels or shop towels using TMR's holder! No more looking for the half used roll that's kicking around on the bottom of your cart or sitting in a pile of dust under your bench! 

When it comes to organizing your shop, race trailer, chase truck, overlander and more TMR Tools has you covered!

TMR's pry bar organizer rack clamp is perfect for freeing up drawer space in your tool box. The externally mounted pry bars are easier to identify and faster to grab - keeping you hard at work to get your project finished!

AVAILABLE IN RAW STEEL OR POWDER COATED ORANGE.

Ever working on your rig, place a tool on the tire, only to have it hit the ground followed by the voice inside your head shouting "F*CK!" ?

Here's the fix! TMR's Tire Tool Trays are designed to give you a clean storage solution for tools, paint, lubricants, etc while working on your vehicle. 

Includes slots for attaching zip ties and a bottle opener for quenching your thirst!

*Ships flat packed - includes stainless steel fasteners!

AVAILABLE IN RAW STEEL OR POWDER COATED ORANGE.

Ever working on your rig, place a tool on the tire, only to have it hit the ground followed by the voice inside your head shouting "F*CK!" ?

Here's the fix! TMR's Tire Tool Trays are designed to give you a clean storage solution for tools, paint, lubricants, etc while working on your vehicle. 

Includes slots for attaching zip ties and a bottle opener for quenching your thirst!

*Ships flat packed - raw steel - requires welding!

Sick of having your vice, grinder, notcher or other tools tie up a big chunk of your work bench? Solve it with the TMR Pitbull Receiver & Pivot Plate!



When you aren't using your vise, grinder, etc. you can remove the pivot plate and tuck it under your work bench or in a cabinet to free up space. 

The Pitbull Receiver & Pivot Plate allow for a full 360 degrees of rotation, perfect for grinding, tube notching, finish work, etc. If you've ever wished your vise or other tools could rotate this is the answer! Simply pull the pin, rotate the Pivot Plate to your desired position, and reinstall the pin. Snug down the 6 grade 8 cap screws and you are ready to work! 

The Receiver is constructed of laser cut 1/4" thick steel and is powder coated orange. 

The Pivot Plate is constructed of laser cut 3/8" thick steel top plate, 2" x 1/4" Wall DOM Tubing, 1/4" thick steel gussets, and is back oxide coated.

Are you searching for an effective way to organize your spools of wire? Look no further! TMR's Wire Spool Organizer Rack is the ultimate solution, CNC laser cut and crafted with care.

The innovative modular design means the racks can be bolted together and stacked on a workbench or bolted to a wall.

Say goodbye to digging around a box and hello to an easy way to find the exact spool of wire you need! Spools not included, of course.

***CLICK HERE FOR DETAILED ASSEMBLY INSTRUCTIONS!***

Are you searching for an effective way to organize your spools of wire? Look no further! TMR's Wire Spool Organizer Rack is the ultimate solution, CNC laser cut and crafted with care.

The innovative modular design means the racks can be bolted together and stacked on a workbench or bolted to a wall.

Say goodbye to digging around a box and hello to an easy way to find the exact spool of wire you need! Spools not included, of course.

***CLICK HERE FOR DETAILED ASSEMBLY INSTRUCTIONS!***

TMR Customs Universal Milwaukee Packout Mounts are ideal for DIYers seeking a modular mounting system for their buggy, rock crawler, UTV, Ultra4 truck, overlander, or even for upfitting a pickup, sprinter van, or work truck. 
They also provide a perfect solution for organizing Milwaukee Packout systems in your garage or trailer.
CNC laser cut from 1/8" steel and supplied raw, you can easily paint or powder coat them to match your custom setup.
Simply transfer the hole pattern from the bottom of the mount onto your flat surface, and drill or tap it for use with 1/4" fasteners. 

MILWAUKEE PACKOUT NOT INCLUDED! 

TMR Customs Universal Milwaukee Packout Mounts are ideal for DIYers seeking a modular mounting system for their buggy, rock crawler, UTV, Ultra4 truck, overlander, or even for upfitting a pickup, sprinter van, or work truck. 
They also provide a perfect solution for organizing Milwaukee Packout systems in your garage or trailer.
CNC laser cut from 1/8" steel and supplied raw, you can easily paint or powder coat them to match your custom setup.
Simply transfer the hole pattern from the bottom of the mount onto your flat surface, and drill or tap it for use with 1/4" fasteners. 

MILWAUKEE PACKOUT NOT INCLUDED! 

When it comes to organizing your shop, race trailer, chase truck, overlander and more TMR Tools has you covered!

TMR's screwdriver organizer rack clamp is perfect for freeing up drawer space in your tool box. The externally mounted screwdrivers are easier to identify and faster to grab - keeping you hard at work to get your project finished!

AVAILABLE IN RAW STEEL OR POWDER COATED ORANGE.

When it comes to organizing your shop, race trailer, chase truck, overlander and more TMR Tools has you covered!

TMR's grease gun holder provides proper storage for 1 grease gun and 1 additional pocket - perfect for brake cleaner or an additional tube of grease! The built in drip tray funnels all grease and liquids to the included stainless steel catch bin/cup. No longer will you have a mess of liquid grease on your floor or workbench on a hot day! 

Looking to mount to a steel surface using magnets? Pro Tip! Purchase rubber mounted magnets from McMaster- Carr, part # 7132T24

Sick of your drill press table filling up with countersinks, taps, hole saws, chuck handles, polishing wheels, and other tools? So were we! So we fixed it with the new TMR Drill Press Organizer.

Simply bolt it onto your drill press column with the supplied gear clamp and enjoy the benefits of being organized! 

NOTE: TMR's Drill Press Organizer is not intended to be a replacement for your existing drill index. It's designed to organize the oddball tools you always use at your drill press. 

AVAILABLE IN RAW STEEL OR POWDER COATED ORANGE.

When it comes to organizing your shop, race trailer, chase truck, overlander and more TMR Tools has you covered!

TMR's hammer holder can be mounted to any flat surface (wall, CNC machine, welding bench, tool box, shop cart, etc.) and provides a clean storage solution that's easy to access! 

Looking to mount to a steel surface using magnets? Pro Tip! Purchase rubber mounted magnets from McMaster- Carr, part # 7132T24

When it comes to organizing your shop, race trailer, chase truck, overlander and more TMR Tools has you covered!

TMR's angle grinder & abrasive organizer provides proper storage for 1 angle grinder and a large assortment of abrasive wheels! Get your grinder and grinding wheels up off your welding table where they'll stay clean and ready for use. Don't forget to crack a cold one on the built in bottle opener after a hard days work!

AVAILABLE IN RAW STEEL OR POWDER COATED ORANGE.

When it comes to organizing your shop, race trailer, chase truck, overlander and more TMR Tools has you covered!

TMR's air tool organizer rack is perfect for getting your air tools off your welding table and up onto the wall where they'll stay clean and organized! There is also storage slots and pockets for small tools and small abrasives. Don't forget to crack a cold one on the built in bottle opener after a hard days work!

SLOT WIDTH MEASURES 3/8"

AVAILABLE IN RAW STEEL OR POWDER COATED ORANGE.

When it comes to organizing your shop, race trailer, chase truck, overlander and more TMR Tools has you covered!

TMR's cordless tool organizer provides proper storage for 2 cordless tools and an assortment of bits and other drivers. Get your drills, drivers, impacts, ratchets and more off your work bench and free up space. Don't forget to crack a cold one on the built in bottle opener after a hard days work!

Compatible with DeWalt, Milwaukee, Rigid, Makita, MAC, Snap-On, Craftsman, Porter Cable, Bosch and more. Check the dimensioned print to confirm fitment. 

AVAILABLE IN RAW STEEL OR POWDER COATED ORANGE.

Sick of having your vice, grinder, notcher or other tools tie up a big chunk of your work bench? Solve it with the TMR Pitbull Pivot Plate!



When you aren't using your vise, grinder, etc. you can remove the pivot plate and tuck it under your work bench or in a cabinet to free up space. 

The Pivot Plate is also portable! It will fit a standard 2" truck hitch and accepts a 5/8" hitch pin - making it ideal for repair work at the race track and more! 

The Pitbull Pivot Plate allows for a full 360 degrees of rotation, perfect for grinding, tube notching, finish work, etc. If you've ever wished your vise or other tools could rotate this is the answer! 

The Pivot Plate is constructed of laser cut 3/8" thick steel top plate, 2" x 1/4" Wall DOM Tubing, 1/4" thick steel gussets, and is powder coated orange. 

TMR's Water Bucket & Holder is the ideal right hand man for your belt sander, drill press, and more.

Crafted from a stainless steel bucket and laser cut mount - it's designed to hold enough water to quickly chill your parts and tools as they heat up.

The bucket can also be used for tool storage if you have common items that are stored next to specific machinery. 

The included bucket measures 6" deep with a 86 Fluid Ounce capacity. 

The holder is available in either Raw Steel or Powder Coated Orange finish.