Jeep TJ/LJ

• CNC machined in-house to exacting tolerances 
• Genuine DuPont Delrin Hinge Liners
• Simply remove your worn-out factory hinge liners and press in place by hand!
   
• Includes the following:
  - Replacement bushings for both driver and passenger Jeep door hinges
  - Removal tool
  - Detailed step by step instruction with a video link to watch a complete install

Designed to work with your factory Jeep door hinges. Includes a detailed step-by-step instruction manual. Installation requires nothing more than simple hand tools and can EASILY be done at home! Be sure to check out our other Jeep products.

WILL NOT WORK WITH AFTERMARKET HINGES!

WILL NOT FIT 1995 YJ OR 1997 TJ WITHOUT BEING TRIMMED DOWN IN LENGTH. SOME 1998 - 1999 TJ'S ALSO REQUIRE TRIMMING. 

SEE THIS LINK FOR INSTRUCTIONAL VIDEO REGARDING 1995 YJ OR 1997-1999 TJ!

FITS 1997-CURRENT JEEP WRANGLER 2 DOOR

Find it a pain in the ass to put your Jeep doors back on? Check out TMR's door pin guides. Simply screw one onto the top pin of each door. The extended length allows the pin to find its way into the hinge, making it easier to align the lower pin. Another nice benefit - they're machined from Delrin so they won't scratch or chip your paint.

TMR Customs Delrin Door Pin Guides make the re-installation of your Jeep doors a breeze! Simply install one guide on the upper hinge of each door and it will greatly reduce the effort required to align the door pins in the door bushings.

• Jeep TJ/LJ/XJ/ZJ Front Lower Control Arm Brackets with Cam Bolt Tabs
• CNC laser cut & formed from 1/4" and 3/16" steel
• Sold in pairs 
• The strongest replacement factory brackets on the market! 
• Welding required! 

***CLICK HERE FOR INSTALLATION INSTRUCTIONS!***

• Zinc coated for excellent corrosion resistance
• Replaces cam bolts when running adjustable control arms
• SOLD EACH! (1 grade 8 bolt, 2 washers & stover lock nut) 

• CNC laser cut and formed from 3/16" and 3/8" steel
• Ships as 6 pieces (2 x formed pillars, 2 x feet, 2 x reinforcement plates)

• Made from heat treated high carbon steel for the ultimate in strength!
• Zinc coated for excellent corrosion resistance
• Cam bolt provides 1/2" of adjustment in both directions 
• SOLD EACH! (1 bolt, 2 washers & stover lock nut) 

Belly-up transfer case fits 1997-2006 TJ and 2003-2006 LJ.

Bolts into factory frame rail locations using 3 factory bolts per side.

CNC laser cut and formed from bulletproof 1/4" high strength steel plate.

A body lift, motor mount lift, exhaust modifications, sye, and adjustable upper control arms will be required. Advanced fabrication and fitment skills are required to install this skid plate in conjunction with a new transmission mount. 

By having your transmission mount separate from the skid plate it allows you to drop the skid plate for service work without having to support you drivetrain - far superior to any set up that ties the transmission mount to the skid plate!

CUSTOM TRANSMISSION MOUNT IS REQUIRED. WE RECOMMEND OUR UNIVERSAL TRANSMISSION CROSSMEMBER MOUNT (PART # 1310) FOR EASE OF INSTALLATION.

Be sure to check out our Jeep off road parts and Jeep TJ/LJ off road products! Shop now!

Have you bent the steel tie rod that is supplied with the RockJock Currectlync Steering System? Upgrade today to a TMR Solid 7075 Aluminum Tie Rod for increased durability!

Commonly referred to as a "memory" alloy, 7075 aluminum tie rods are the answer to replace bent or damaged steel tie rods.

All TMR Customs 7075 aluminum tie rods have a full hex machined on both ends for ease of adjustment and jam nut tightening. 

• CNC machined in house from 1.5" Diameter 7075 Solid Aluminum.
• Includes 1 x replacement Tie Rod Bar & Jam Nuts. 
• DOES NOT INCLUDE ANY COMPONENTS FROM THE CURRECTLYNC KIT. THIS IS THE ALUMINUM BAR ONLY, YOU WILL SUPPLY ALL THE OTHER COMPONENTS.
• Direct fit replacement for the Tie Rod Bar from CE-9701 TJ/LJ/XJ/MJ/ZJ Currectlync Steering System from RockJock 4x4 (Formerly Currie Enterprises). 

For 1987-2001 Jeep XJ's, 1997-2006 Jeep TJ's and LJ's, and Jeep MJ's. This new kit from Currie allows our 2" Johnny Joints® with 7/16" (stock size) thru bolts to be installed on stock or most aftermarket front end housings in place of the standard upper control arm bushings. The kit includes a Johnny Joint® insert for gear case ear and installation tool, as well as 1" thick flame-cut steel upright for the tube side, with Johnny Joint® already installed. This kit requires cutting and welding equipment for installation!!!